Find the Right EcoFlow Backup System for Your Home
Pick the loads you want to keep running, enter your air conditioner's locked-rotor amps (LRA), and set how long you want to stay powered. The tool sizes five EcoFlow systems against your answers and pairs each with the home panel or gateway EcoFlow supports for it. Once you've picked your system, call Georgia Solar Panels at (470) 227-0955 to install it!
Every system against your home
Ranked by fit, then by the simplest setup: fewest inverters, then smallest platform.
| System | Configuration | Gateway | Fit | Main reason |
|---|
Which gateway works with which unit
From EcoFlow's installation guides (Smart Home Panel 2 V1.3, Smart Home Panel 3 V1.1, Smart Gateway 200A V1.3, Smart Inlet Box V1.1), and EcoFlow product pages. A unit and panel that are not marked compatible cannot be paired.
| Smart Home Panel 2 | Smart Home Panel 3 | Smart Gateway 200A | Smart Home Panel 10 (240V) |
|---|
Power unit specs
Gateway and panel specs
Ratings are from the technical specification pages of EcoFlow's installation guides. Smart Home Panel 10 figures come from the Tech Specs tab on EcoFlow's TITAN 5000 page.
| Smart Home Panel 2 | Smart Home Panel 3 | Smart Gateway (200A) | Smart Home Panel 10 (240V) |
|---|
How the numbers are worked out
- AC running power: 1,167 W per ton, taken from EcoFlow's own figure of 3,500 W for a 3-ton central AC. Older or low-SEER units draw more.
- AC starting check: EcoFlow doesn't publish an LRA limit for any of these units. It publishes the largest AC each can start: 5-ton for DELTA Pro Ultra X and 3-ton for TITAN 5000 / 5000 Plus. The tool compares your LRA with the typical LRA for that tonnage (3-ton ≈ 80 A, 5-ton ≈ 135 A); within 15% over is borderline. EcoFlow claims 3 ton AC for TITAN, soft start recommended, so TITAN without a soft starter is flagged. DELTA Pro Ultra uses an 80–90 A LRA range (9.2 kW surge): up to 80 A passes, 80–90 A is borderline, above 90 A fails.
- Soft starter: modelled as cutting starting current by 60%. Makers advertise up to 75%.
- Usable energy: 90% of rated battery capacity, to allow for inverter losses.
- Solar: panels × 400 W × peak sun hours, with sun hours cut by the safety factor. The array is capped at each system's solar input (10 kW per DELTA Pro Ultra X, 5.6 kW per DELTA Pro Ultra, 8 kW TITAN 5000 Plus, 4 kW TITAN 5000, 2.6 kW per DELTA Pro 3). How panels are wired in series and parallel must also stay inside each input's voltage window, which your installer sets.
- Peak load: everything selected running together, plus every AC running. With heavy-load management on, only the largest of the electric range, dryer, water heater and EV charger is counted.
Sources
- EcoFlow: DELTA Pro Ultra X
- EcoFlow: DELTA Pro Ultra
- EcoFlow: DELTA Pro 3
- EcoFlow: TITAN Series and FAQ
- EcoFlow: TITAN 5000 (tech specs and series comparison)
- EcoFlow: TITAN 5000 Plus
- EcoFlow: Smart Home Panel 2
- EcoFlow: Smart Home Panel 2 Installation Guide V1.4
- EcoFlow: Smart Home Panel 3
- EcoFlow: Smart Home Panel 10
- EcoFlow: Smart Gateway
- EcoFlow: Smart Gateway (200A) user manual
- Popular Science: TITAN 5000 launch
- pv magazine: TITAN launch
- Backup Power Hub: TITAN review
- The Solar Lab: DPU bench test
- SolarGen Review: DPU X